Sichuan CRUN Co., Ltd.
Main products:Lubrication System,Hydraulic System,Hydraulic Cylinder,Hydraulic Components,Pressure Vessel
Products
Contact Us
  • Contact Person : Mr. Chen David
  • Company Name : Sichuan CRUN Co., Ltd.
  • Tel : 0086-28-61836262
  • Fax : 0086-28-61836323
  • Address : Sichuan,Chengdu,No.85, Gangbei 6th Road, North Section of Modern Industrial Park, Chengdu City, P.R.China
  • Country/Region : China
  • Zip : 611743

Listed Company CRUN/Industrial Boiler-410T/H CFB Boiler

Listed Company CRUN/Industrial Boiler-410T/H CFB Boiler
Product Detailed
410T/H high temperature industrial boiler: 1.Single steam drum 2.Circulating fluidized bed combustion 3.Natural circulation

410 T/H high temperature separating fluidized bed boiler ( industrial  boiler) is with:

Single steam drum

Natural circulation

Circulation fluidized bed combustion

Semi open-air type arrangement

The boiler consists a membrane walled combustion chamber, 2 sets of steel plate type cyclone separator and a rear part vertical shaft (HRA) wrapped with air-cooled wrapping wall.

Inside the combustion chamber, panel type heating surface, 4 pieces of pipe panels for panel type super-heater and 3 pieces of water-cooled evaporating panels are provided.

The boiler is provide with a total of 4 sets of coal-feeding devices and 2 limestone-feeding ports. All the coal-feeding device and limestone-feeding port are situated at the front part of the boiler, and are evenly arranged in cross direction on the tapered section at the lower part of the water-cooled wall of the front part wall.

The bottom part of the combustion chamber is a water-cooled air chamber made of water screen tube. Air conduit igniters are arranged behind the water-cooled air chamber. There are 2 sets of air conduit igniters, and in each, one high capacity ignition oil burner is provided. At two sides of the combustion chamber, 2 sets of air and water-cooling mode optional fly ash discharging and slag cooling devices for multiple chamber type fluidized beds are provided. 2 sets of cyclone separators are arranged between the combustion chamber and the rear part vertical shaft, and at the lower part of each separator, one set of “J” type valve feed back device is provided.

In the rear part vertical shaft, high and low temperature superheaters, coal economizer and horizontal type air pre-heater are provided from top to bottom successively. In the superheater system, 2-stage direct-contact desuperheater is provided.

The whole body of the boiler is arranged symmetrically at the left and right side, suspended on the steel frame of the boiler, which is a space frame with subposts at both sides.

Listed Company CRUN/Industrial Boiler-410T/H CFB Boiler



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.